Machining Calculator

Instructions

• Select Calculation Type: Choose the type of calculation you want to perform from the dropdown menu (Spindle Speed, Cutting Speed, Feed Rate, Feed Per Tooth).

• Spindle Speed (RPM):

  • Cutting Speed (m/min): Enter the desired cutting speed in meters per minute.

  • Diameter (mm): Enter the diameter of the workpiece in millimeters.

  • Calculate: Click on the "Calculate" button to determine the required spindle speed.

• Cutting Speed (m/min):

  • Spindle Speed (RPM): Enter the current spindle speed in revolutions per minute.

  • Diameter (mm): Enter the diameter of the workpiece in millimeters.

  • Calculate: Click on the "Calculate" button to determine the cutting speed.

• Feed Rate (mm/min):

  • Spindle Speed (RPM): Enter the spindle speed in revolutions per minute.

  • Feed per Tooth (mm/t): Enter the feed per tooth in millimeters per tooth.

  • Number of Teeth: Enter the total number of teeth.

  • Calculate: Click on the "Calculate" button to determine the feed rate.

• Feed Per Tooth (mm/t):

  • Spindle Speed (RPM): Enter the spindle speed in revolutions per minute.

  • Feed Rate (mm/min): Enter the feed rate in millimeters per minute.

  • Number of Teeth: Enter the total number of teeth.

  • Calculate: Click on the "Calculate" button to determine the feed per tooth.

• Results: After clicking "Calculate," the tool will display the calculated parameter based on the entered values. Additionally, the formula used for the calculation will be shown for reference.